The Not-So-Hidden Costs of Losing an EHS Team Member (and How to Keep What They Know)
When an EHS team member leaves, approval history, inspection follow-ups and lab knowledge can leave too. See what it costs and how to keep it.

Download Whitepaper
TL;DR
When an EHS team member leaves, the biggest cost is rarely the vacancy itself: it's the approvals, inspection history and lab knowledge that only they could explain.
- Turnover is speeding up.
CUPA-HR data shows median tenure for higher-ed fire safety supervisors fell from 10 years to 4 between 2019–20 and 2023–24. Intelex found 75% of 865 EHS professionals report a talent shortage, and ASSP's 2026 Corporate Listening Tour names workforce instability as a primary safety risk.
- The reasoning leaves first.
Approval letters and inspection reports stay on file, but why an Institutional Biosafety Committee (IBC) set a restriction, or that a finding keeps coming back in one lab, often lives in email and memory. Successors then rebuild history instead of managing risk.
- Lab cleanouts expose the gap.
When a principal investigator (PI) or lab leaves, EHS often handles the cleanout. Without current chemical inventories, biological registrations and waste records, the team faces unlabeled samples and containers with no context, which costs time and adds exposure risk.
- Keep history on the record.
With SciSure Health & Safety, biosafety registrations keep reviewer questions, amendments and renewals attached, and inspections keep findings and follow-up correspondence together, where those modules are in use. Training and chemical records belong to the organization, not one person.
We first published this post in 2019 and updated it to include 2025–2026 EHS workforce data, biosafety and inspection handover examples, a lab cleanout section, an EHS handover checklist, and updated customer proof from San Diego State University.
Ready to see SciSure in action?
No commitment · Free consultation
Every EHS team loses people. Someone retires, moves to the medical center across town, or gets promoted into a role that no longer touches the inspection schedule. The empty seat is the visible part. The harder part shows up weeks later, when a successor opens an old biosafety approval and can't tell why the committee set a restriction, or when a principal investigator (PI) leaves and nobody knows what's in the freezer.
This post covers the safety side of turnover: what goes missing when an EHS team member leaves, what it costs, and how SciSure Health & Safety helps keep safety knowledge with the records it belongs to.
Why EHS turnover is harder to absorb now
The recent data points the same way: people stay in EHS roles for less time, and experienced replacements are harder to find.
- Shorter tenure.
The College and University Professional Association for Human Resources (CUPA-HR) found that median time in position for higher-ed fire safety supervisors fell from 10 years in 2019–20 to 4 years in 2023–24. For non-supervisory fire safety professionals, it fell from 3 years to 1. - Fewer people to hire.
In the Intelex Voice of EHS 2026 report, 75% of 865 EHS professionals across North America and Europe reported ongoing talent shortages. - A longer ramp-up.
The American Society of Safety Professionals (ASSP) 2026 Corporate Listening Tour report names workforce stability as a primary driver of safety risk. According to Lab Manager's summary, it notes that new employees can need 12 to 18 months to reach the safety proficiency of an experienced worker.
In a lab, that ramp-up happens while chemicals are being ordered, protocols are being amended and inspections are coming due.
Watch out for the bus factor
The "bus factor" comes from software development. It's the number of people who would have to disappear before a project stalls. For a lot of EHS programs, that number is one.
It doesn't take a dramatic exit to test it. Retirement, parental leave, a promotion or a long vacation all ask the same question: could someone else pick up this work from the records alone?
What walks out the door when an EHS team member leaves
Approvals lose their reasoning
Biosafety is a good example. An Institutional Biosafety Committee (IBC) reviews work with recombinant DNA and biological agents before it starts, and it often sets conditions. A new biosafety officer shouldn't have to reconstruct why the IBC approved a particular protocol, what restrictions were imposed, or whether earlier concerns were resolved.
In many organizations, that history sits in email threads, meeting notes and one person's memory. The approval letter is on file. The questions and answers that shaped it aren't. (For what reviewers look for in the first place, see How to Prepare a Strong IBC Submission.)
Inspections lose their follow-up
An inspection report might show a fume hood sash left open. It often won't show that this is the third time in that lab, that the PI agreed to a fix by a set date, or that the follow-up happened over email. The next inspector starts from zero, and a repeat finding looks like a first one. Our guide on why lab safety inspections matter more as your lab scales covers how to keep inspections consistent.
Lab cleanouts start blind
When a PI retires or a lab moves, EHS is often the team that handles the cleanout. If the person who knew that lab has gone, the team can end up opening freezers and cabinets with no idea what the samples are, what hazards they carry, or which registration covers them. Unknown materials take longer to identify, may need testing before disposal, and put staff at risk while they're handled.
Training, corrective actions and communication lose their owner
Someone was tracking overdue training, chasing open corrective actions and sending safety updates to researchers. When that person leaves, those tasks don't disappear. They just stop, often without anyone noticing until an audit or an incident.
What it actually costs
There's no reliable published figure for the cost of safety knowledge lost when someone leaves. Hiring is the easiest part to count: SHRM's 2025 benchmarking puts the average cost per hire at $5,475 for non-executive roles and $35,879 for executive roles. That covers recruiting only.
The larger costs are harder to invoice:
- Time. Successors spend hours rebuilding history from inboxes and binders instead of managing risk.
- Risk. Missed renewals, repeat findings that look new, and unidentified materials during a cleanout.
- Audit exposure. Recordkeeping requirements don't pause because the person who kept the records has left.
- Pressure on the people who stay. Extra work lands on a smaller team, which is how one departure turns into two.
How SciSure keeps safety knowledge with the record
The fix is to keep the context attached to the record it explains, so a successor reads it instead of rebuilding it. Here's how that works in SciSure Health & Safety, where the relevant modules are in use.
Biosafety registrations keep their review trail
In SciSure Biosafety Management, reviewers can request clarification, add notes and move a submission to committee review. Those questions and their resolutions stay attached to the registration, along with its amendments and renewals. A new biosafety officer can open a registration and see what the committee asked, what changed and when it was approved. Biological materials are linked to projects, people and spaces, so the registration also shows what's in use and where.
Inspections keep their history
Findings are tied to the exact space, with photos, corrective actions and follow-up correspondence stored with the inspection. Inspectors can see a lab's earlier findings when they go back, and dashboards show repeated findings by lab or department. That's how the next inspector knows the open fume hood sash is a pattern, not a one-off.

Chemical records belong to the lab group
In ChemTracker, containers belong to a lab group rather than the person who added them. With an HR directory connection set up during implementation, departed users can lose access automatically while the records stay put. Reconciliation supports checks by space, which helps when a lab is being cleared.
Training follows the role
SciSure Training LMS assigns courses by role, hazard or regulatory requirement, and every record stays with the organization. At San Diego State University (SDSU), "If a person is in multiple labs, their training applies to all labs," says Jennifer Ramil, director of EHS. Her team now looks up one person's training records in about a minute instead of several hours. A training compliance report for a department head went from two weeks to about 10 minutes, and training compliance rose from 56% to over 80%.
A head start on lab cleanouts
Together, these records give EHS a starting list when a lab closes: chemical containers by space, registered biological materials by project and space, and waste profiles with their pickup history. Research samples are a separate set of records. Our guide on managing lab staff turnover covers how to keep sample context when scientists leave.
An EHS handover checklist
Use this when someone on your team gives notice, or better, before anyone does.
- Map where safety records actually live.
Shared drives, inboxes, personal spreadsheets and paper binders. Anything outside your system of record is at risk. - Hand over open items before the last day.
Open inspections, corrective actions, registrations awaiting review, and renewals or certifications due in the next 90 days. Each one needs a named owner. - Put the reasoning on the record.
Ask the departing person to add notes on IBC conditions, exceptions and recurring issues to the registration or inspection itself, not to a handover email. - Reassign ownership, not just logins.
Inspection routes, lab assignments, waste pickups and the training courses they managed. - Agree a lab closeout routine before you need one.
Decide who verifies the chemical inventory, who checks biological materials against registrations, and who signs off waste. Start when a PI gives notice, not on their last day. - Overlap where you can.
Relationships with PIs, building quirks and judgment calls don't fit in a record. A few weeks of shadowing passes them on.
Keeping the EHS people you have
The cheapest handover is the one you don't need. CUPA-HR suggests reducing overwork, giving raises where possible, and protecting staff from health and safety concerns. It also recommends focusing on non-supervisory staff, who turn over more often. The basics still apply too: people stay where they feel heard and valued.
Cutting admin helps more than it might seem. After SDSU automated its training reporting, Ramil noticed the change in her team: "People are more creative in how they solve other problems now." If you're weighing software to take some of that load off, our comparison of the top EHS software platforms for labs is a good place to start.
FAQ
What happens to safety records when an EHS manager leaves?
The records usually stay, but the context around them often goes. Approval reasoning, inspection follow-ups and open corrective actions tend to live in email and memory. Keeping that context attached to each registration, inspection and training record lets a successor pick up the work without rebuilding it.
How do you transfer knowledge when a biosafety officer leaves?
Start with open registrations, pending reviews and renewals due soon, and give each one a named owner. Ask the departing officer to add notes on IBC conditions and unresolved concerns to the registration itself. Then overlap the successor with the outgoing officer for a few weeks if you can.
What is the bus factor in EHS?
The bus factor is the number of people who would have to leave before a program stalls. In many EHS teams it's one: a single person knows the inspection schedule, the open findings or the biosafety history. Moving that knowledge into shared records raises the number.
Who handles lab cleanout when a PI leaves?
It depends on the institution, but EHS is often involved, working with the department and the PI's group. Cleanouts go faster and safer when current chemical inventories, biological registrations and waste records show what's in the lab and where. Agree the routine when the PI gives notice.
How much does EHS turnover cost?
There's no reliable published figure for lost safety knowledge. Hiring alone averages $5,475 for non-executive roles, according to SHRM's 2025 benchmarking. The larger costs come from time spent rebuilding history, missed renewals, repeat findings and audit exposure.
Can EHS software prevent knowledge loss?
Only if people use it and the context is stored with the record. A system that holds approval letters but not the review questions, or inspection reports but not the follow-up, still leaves gaps. Look for history that stays attached to each record and access that ends when someone leaves. If this is the kind of support you and your lab (or labs) need, get in touch with us.
Keep reading
- How Can We Automate Lab Safety Inspection Workflows Across Multiple Labs?
- Lab Safety Training: Requirements & Cost of Neglect
- Understanding SciShield: How SciSure Health & Safety Keeps Up With Lab Safety Data
- How to Manage Reactive Chemicals in the Lab: Warning Signs & More
- Lab Compliance Training: How a Lab LMS Keeps Safety Training Current
- Best Practices for Chemical Storage in Research Labs
- How to Identify a Quality Chemical Inventory Database: 6 Things to Check
- Hazardous Chemical Management for Labs: A Loss Control Guide
- Chemical Compliance Management Software: A Buyer's Guide
- Automated Lab Compliance Solutions For Your Next Lab Audit
- Chemical Inventory Best Practices for Multi-Site Labs
- SDS Management for Labs: How to Define Your Requirements
Read more of our blogs about modern lab management
Discover the latest in lab operations, from sample management to AI innovations, designed to enhance efficiency and drive scientific breakthroughs.



.jpg)